Ideal para parcelas estrechas y en pendiente

Nos hemos esforzado en dar a los salones distintas cualidades, incluyendo los exteriores. En el piso de arriba encontramos una gran terraza abierta, mientras que el balcón cubierto de la planta baja está más resguardado de la intemperie.

Wooden houses with MINI elements - Factory package

Production drawings

  Drawings of exterior walls
  Window specification
  Roof trusses/rafters plan
  Production drawings of structure
  Statical calculations of structure
Our technical study includes the following services as part of the
  Preparation of working structural drawings
  Static stability test on the structures, including:
  Verification of the structural design drawings
  Verification of material test certificates
  Technical inspection reports

Frame Construction

This means you get: construction for external walls bearing internal walls included as raw material, Roof construction, Rafters
  Posts: 140x140mm glue-laminated timber
  Beam supports: 140x240mm glue-laminated timber
  Bearing internal walls: Timber construction C24 / 45×95/120/145mm

Roof construction

Supply of trussed rafter roof. The on-site supply and installation of the structure for the creation of the roof includes:
Supporting beams with roof trusses in accordance with the structural
25 x 100 mm battens
18 mm OSB panel covering
Breathable membrane / RIWEGA DO 135
25 x 50 mm battens + usb tip kont - tape
From 1 to 9 – included in the price
From 10 to 15 – NOT included in the price
All the solid and/or laminated timber structures meet the requirements
set out in clause a) of section 11.1 of the ntc 2018 standards
(ce marking of structural elements)

MINI elements – Wooden panels

This means you get: external walls, insulated and with wooden cladding, bearing internal walls included as raw material, roof construction / Rafters.
Optional on request: transport and installation. The internal planning can be modified. In case of minor changes, the price of the house remains the same. If you wish to build according to your own project, we can calculate an individual offer based on your drawings.
Due to fixed panel dimensions, we’ll be able to produce your house in a very short time. And because the elements are small, they’ll be easy to ship not only all over continental Europe, but also to islands, using containers.
  Insulated wall elements (MINI ELEMENTS)
  Wooden cladding UYVk 18×145 Spruce AB – horizontal
  Wind barrier TYVEK or RIWEGA
  Timber construction KVH C24 / 40x100mm with cc 600mm interval
  100mm insulation ROCKWOOL / SUPERROCK
  12mm OSB Plates

Windows and terrace doors

Supply and installation of all windows and window doors
All the windows and patio doors are triple glazed with double cavity and have Class S profiles (as specified in standard EN 12608). They also have a very
high radiation resistance value (12 GJ/m2), well above the limit
stipulated by the standard.
The supply of windows and patio doors is as follows:
PVC, in white or in a colour selected from our catalogue
Triple glazing with double cavity
Class S profiles
Radiation resistance coefficient equivalent to 12 GJ/m2
Thermal performance coefficients Uw value = up to 0.50 W/(m2K) / Uf value = 0.95 W/(m²K)
Window doors higher than 210 will be subject to a surcharge
Sliding doors / sliding windows are not included in the price
We use the Brügmann bluEvolution 82 window system

Delivery to the property

Delivery time – ca. 6 weeks
Before house installation, the following things need to be on site:
Concrete foundation based on drawings and measurements provided by Norges Hus Nova OÜ
Access for 40t trucks
Electrical supply
Possibility of storing materials on site

List of technical supplies and services not included

The following are not included in the supplies and are
therefore the responsibility of the client:
Foundation slab
Scaffolding and portable ladders
Plugging of openings and perimeter walls before finishing coat
Where it is not possible for articulated trucks to access the construction site,
transport from the nearest accessible unloading point to
the site is the responsibility of the client
Lodging for the assembly team for the entire duration of the assembly phase
Disposal of site waste
Everything not explicitly specified in the sections set out in this offer
  Casa de madera 32: €14.643 + IVA
  Transporte: from €1.500 + IVA
  Visible beams: €4.468 + IVA
  Ensamblaje: €5.500 + IVA
  Coste total: €41.500. + IVA

Detalles de tecnologías

Usamos exclusivamente madera sólida de construcción de alta calidad. Gracias a la madera sólida de 13 metros, de ensamblado tipo dedo y secada en horno, podemos ofrecer construcciones increíblemente estables de hasta 3 plantas. Obtener más información sobre la producción
Paquete de fábrica
Obtener más información sobre el paquete de fábrica
Ver vídeos
Tecnologías, reseñas y más

Catálogo en PDF y más

Ver la producción de casas prefabricadas

¿Por qué elegir Norges Hus?


La estructura de madera de nuestras casas se ha desarrollado teniendo en cuenta los requisitos climáticos específicos y las normas de construcción de Noruega. Usamos exclusivamente madera sólida de construcción de alta calidad.


Sabemos que la combinación de una buena ciencia de construcción asequible con los productos y materiales adecuados puede dar como resultado una casa más robusta y eficiente, a la par que respetuosa con el medioambiente.


Con más de una década de experiencia en la construcción de viviendas, Norges Hus cuenta con todo lo necesario para ofrecer productos y construcción de calidad y garantizar la satisfacción del cliente.

Ver últimos vídeos Más vídeos 

  Madera sólida de construcción
  Restructura 2014
  Cobertizos para coches directa...
  la fábrica de Norges Hus
¿Alguna pregunta?
No dude en preguntarnos